Αρχική Η Εταιρεία Τρόποι Πληρωμής Επικοινωνία Είσοδος   |   Εγγραφή
  


Κατηγορίες
Προτάσεις
DREAMBOX DM 800 SE HD ORIGINAL
DREAMBOX DM 800 SE HD ORIGINAL

€479.00  



Προϊόντα: 460
Επισκέπτες Online: 64



Το καλάθι αγορών σας έχει ενημερωθεί

Το προϊόν Duolabs Cas 3 Plus Interface + USB Cable + Software
έχει προστεθεί στο καλάθι αγορών σας!
« Επιστροφή στο κατάστημα Διαχείριση Καλαθιού »
» Αρχική » PROGRAMMERS

Duolabs Cas 3 Plus Interface + USB Cable + Software
Κάντε κλικ για μεγέθυνση

 

Duolabs Cas 3 Plus Interface + USB Cable + Software

Κωδ.: DUOI8
Τιμή: €75.00

Τεμ.:



Duolabs Cas 3 Plus Interface + USB Cable + Software

The Cas 3 Plus consists of a device which is also the functionalities
of the Cas 2 Including Cas 2 includes addons.
Besides this novelty, there are still some other features worth mentioning:
The Cas 3 Plus can be a real Ci shaft emulate.
This means that a module can no longer plug into the PC needs to
be programmed.
Also, the Cas 3 Plus all known maps and repair program.

Basic functions of the Cas 3 Plus interfaces:

- Full Speed USB connection with 12 Mbps
- RS-232 connector
- 20 pin connector for external links
- Internal Clock Speed 48 MHz
- No external power n? Time
- Full support for PCMCIA
- Full support for future wireless applications
- Cas Studio software support

Below is the basic functions described in more detail:


- Magic Module
- Matrix Module
- Matrix Revolution Module
- Matrix Reloaded
- Matrix Reborn

and all SIDSA based directly on the cams can be described
PCMCIA port.
Thanks to the 48 MHz module k?
Can most modules around 4 x faster than described by
Cas 2 Interfaces.

- Joker Cam
- Zeta CAM

and all the modules on the chipset based Neotion: These
modules can be supplied with the J card repaired and described.

T Rex modules:
All T Rex modules can be directly via Cas 3 Plus described.
This is much safer than when the modules are programmed
with a receiver.
Modules can also be broken again be repaired where the
Flash memory is fehlprogrammiert.
XCAM with Angel and Orion chipsets, standard and premium versions
All XCAM modules can be directly via Cas 3 Plus described.
This is much safer than when the modules are programmed
with a receiver.
Modules can also be broken again be repaired where
the Flash memory is faulty.

Tickets programming:


It allows all market via USB cards can be programmed:
So it is no problem all PIC and AVR based cards quickly and
securely to describe.
Titanium also can / OPOS and Knotcards described.
Thanks to the great flexibility of the Cas 3 Plus module cards
can also be implemented future.
T Rex also defective cards can be repaired.
RS232 Phoenix Smartmouse emulation:
There can be no problems with the RS-232 a Smart Mouse
be emulated.
Thanks to the flexible 48 MHz system clock, you can select
the following frequencies: 3.58/3.68/4.00/6.00 Mhz.
Dreambox 56XX and 7000 bootloader repair function:
Simple and easy to repair the Bootloader Dreambox is now
with Cas 3 Plus possible.

Cam Explorer:


Each module can be used in the Cas 3 Plus interface appeal and
it is as if a receiver would be inserted.
You can browse through the menus directly on the PC.
Check out the pictures at the end.

SIM card editor:


You can use this tool to map out your cell phone (contacts) and change.
You also need a USB cable and an RS232 cable











Καλάθι αγορών
0Προϊόντα:
€0.00 Σύνολο:
Δημοφιλέστερα

    RED LIGHT 3 RED LIGHT 3
    €32.00
 


Newsletter
Συμπληρώστε το email σας
για να λαμβάνετε ενημερώσεις.






    
© 2010 - 2014 - europesat.gr -- Κατασκευη eshop by infocus